网站转让 → 您的公司名称

优质的托辊支架装置既便于更换托辊的托辊支架装置，涉及有可偏转托辊支架、支座、销轴、机身、托辊、限位块和紧固件组成。支座下端与机身上端用紧固件连接在一起，支座则用销轴与可偏转托辊支架连接在一起，在可偏转托辊支架上设置有托辊。在可偏转托辊支架上，设置有供绕销轴转动的卡槽，托辊则安装在可偏转托辊支架的卡槽中，在可偏转托辊支架上设置有控制偏转角度的限位块。在支座或机身上设置有供可偏转托辊支架绕其转动的销轴，在拆下紧固件的情况下，可偏转托辊支架可以在限位块的控制下绕水平固定的销轴转动一定的角度。 槽型支架属于托辊支架的一种。采用先进的生产工艺，保证产品质量。槽型托辊清除皮带沾物，在斜坡皮带上送力大，阻力小，效果最佳。双节托辊，能减轻皮带在陶瓷托辊上的重形压力点，托辊中空装置能使带沾物自行掉落，不沾吸托辊，均能延长托辊使用期。
The high quality idler bracket device is not only convenient to replace the idler bracket device, but also consists of a deflectable idler bracket, a support, a pin shaft, a body, an idler, a stop block and fasteners. The lower end of the support is connected with the upper end of the fuselage by fasteners, and the support is connected with the deflectable idler bracket by a pin shaft, and an idler is arranged on the deflectable idler bracket. The deflectable idler bracket is provided with a clamping groove for rotating around the pin shaft, the idler is installed in the clamping groove of the deflectable idler bracket, and the deflectable idler bracket is provided with a stop block for controlling the deflection angle. A pin shaft for the deflectable idler bracket to rotate around it is arranged on the support or the fuselage. When the fasteners are removed, the deflectable idler bracket can rotate around the horizontally fixed pin shaft at a certain angle under the control of the stop block. The groove support belongs to a kind of idler bracket. Adopt advanced production technology to ensure product quality. The groove type idler can remove the dirt on the belt, and the conveying force is large and the resistance is small on the slope belt, and the effect is the best. The double section idler can reduce the heavy pressure point of belt on the ceramic roller, and the hollow device of the idler can make the dirt fall down by itself, and can not touch the roller, which can extend the service life of the roller.