| 托辊支架注意事项 |
| 添加时间：2019/8/20 16:29:50 浏览次数： |
| 托辊支架注意事项 Cautions for supporting roller support 优点与作用 Advantages and Functions 1、调心托辊支架支撑力度强、灵活性高、摩擦小、寿命长。 1. The self-aligning roller support has strong support force, high flexibility, low friction and long service life. 2、调心支架径向跳动量;灵活度;轴向窜动量。 2. Radial bracket jitter; Flexibility; Axial jitter. 3、调心支架防尘、防水、轴向承载、抗冲击、使用寿命五个关键点。 3. The five key points of the self-aligning bracket are dust-proof, waterproof, axial load-bearing, impact resistance and service life. 4、其安装在输送带的两侧，防止输送带发生跑偏。有效使得胶带运行平稳可靠。 4. It is installed on both sides of the conveyor belt to prevent deviation of the conveyor belt. Effectively make the belt run smoothly and reliably. 5、调心效果显著，且结构简单，完全可以满足现代作业发展的需要。 5. The adjusting effect is remarkable, and the structure is simple, which can fully meet the needs of the development of modern operation. 注意事项 Matters needing attention 使用过程中应注意调整托辊支架可以有效防止胶带跑偏现象。这样就不会引起漏料、设备的非正常磨损与损坏、降低生产率，而且会影响整套设备的正常工作这样的麻烦。 In the process of using, attention should be paid to adjusting the supporting roller bracket to effectively prevent belt deviation. This will not cause material leakage, abnormal wear and tear of equipment, reduce productivity, and will affect the normal operation of the whole set of equipment such trouble. |
| 上一页 槽型支架属于托辊支架的一种 |
| 下一页 托辊支架注意事项 |